WARNING: Use the skip volume check boot mode only when instructed to do so by a NETGEAR technical support representative, otherwise data loss might occur. Use this option to skip the scan and let the system boot If several problems are found on a disk, this process can stall, causing the system not to boot. After a system crash, the system tries to scan and fix the volume via a file system check. Use the tech support boot mode only when instructed to do so by a NETGEAR technical support representative.
OS reinstall boot mode also resets some settings on your storage system, such as Internet protocol settings and the administrator password, to defaults. Use the OS reinstall boot mode when the system crashes and corrupts some configuration files. Reinstalls the firmware from the internal flash to the disks. WARNING: The factory default reboot process resets the storage system to factory settings, erases all data, resets all defaults, and reformats the disk to X-RAID2. After 10 minutes, or if you select the factory default option using RAIDar during the time-out period, the factory process begins. During the 10-minute time-out period, the system can be powered off safely without causing any data loss. Initiates a short disk test that takes approximately 5 minutes, then begins a 10-minute time-out period waiting for RAIDar. Initiates a normal boot process, just like booting using the Power button. Your storage system has the following boot modes: Use the boot menu to restart or troubleshoot your ReadyNAS storage system.
0 kommentar(er)
